27th WORLD EXHIBITION FOR WOODWORKING TECHNOLOGY AND COMPONENTS FOR THE FURNITURE INDUSTRY MILAN (ITALY) - FIERAMILANO
FAIRGROUNDS RHO OCTOBER 12-15, 2022
Organizer:
CEPRA Srl Unipersonale Centro Direzionale Milanofiori 1ª Strada - Palazzo F3
I-20057 ASSAGO (MI) P.IVA 04701000152
Cap. Sociale E 412.800,00 I.V
R.E.A. 1031986
Registro Imprese MI146-193211 Tel. +39-02-89210200
Fax +39-02-8259009
info@xylexpo.com www.xylexpo.com
Company data
The following data will be published in the Official Exhibition Catalogue
Fill in both fields
Fill in both fields
Invalid email address
Invalid website
Enter the VAT number / TIN without the Country code Invalid VAT number
Invalid email address
Invalid email address
7 characters Value not valid: the length must be 7 characters
Field required
15 characters Value not valid: the length must be 15 characters
10 characters Value not valid: the length must be 10 characters
6 characters Value not valid: the length must be 6 characters
Invoice address [1]
Field required
Enter the VAT number / TIN without the Country code Invalid VAT number
Shipping address [2]
Field required
Person in charge for the exhibition
Fill in both fields
Invalid email address
The email and confirm email do not match
Fill in both fields
Contact person of the exhibitor for the exhibition safety (RSE)
Field required
Fill in both fields
Invalid email address
The email and confirm email do not match
Fill in both fields
RSPP (Safety assurance manager in the company)
Field required
Fill in both fields
Invalid email address
The email and confirm email do not match
Fill in both fields
Legal representative
Field required
Fill in both fields
Invalid email address
The email and confirm email do not match
Fill in both fields
Remarks
[1] To be completed only if the invoice must be made out to a company name other than that indicated above. You must send an acceptance declaration signed by the billing customer.
[2] To be completed only if the documentation has to be sent to an address different from the one indicated above.
General Regulation
Field required
Technical Regulation
Field required
Raised platforms regulation
Field required
Privacy
As per articles 35,36,37 of the General Rules, the undersigned Company, in accordance with and for the effects of articles 6, 7 and 13 of Regulation (EU) 2016/679 (General Data Protection Regulation), declares to have read and understood the Information Notice of CEPRA e Fiera Milano SPA concerning the processing of personal data provided by filling in the present application form, being fully informed of the rights stated in such document and knowing how and where to exercise them, and
- express its consent for the processing of personal data for purpose b) of the information notice, articles 35,36,37 of General Rules (direct marketing)
Field required
- express its consent for the processing of personal data for purpose c) of the information notice, articles 35,36,37 of General Rules (transmission of personal data to Third Parties for marketing activities
Field required
Stand requirements
(without any engagement on the part of the Organizer)
Min. 20.00 sqm
Invalid size
Field required
SCHELL SCHEME SOLUTIONS: For the fitting-up of the row space the Exhibitor may order and purchase one of the shell scheme solutions through the exhibitor portal, e-service section, once open.
Relevant product sector
Field required
Number of co-exhibitors / represented companies
Participation fees
According to General Rules article 13, the participation fees are the following:

Participation fee, “Early Bird” discount, within December 31st, 2021:
- € 165/sq.m for exhibition surfaces up to 100 sq.m
- € 155/sq.m for exhibition surfaces from 101 to 300 sq.m
- € 145/sq.m for exhibition surfaces from 301 to 500 sq.m
- € 135/sq.m for exhibition surfaces from 501 to 1000 sq.m
- direct contracting for exhibition surfaces up to 1000 sq.m

Participation fee starting from January 1st 2022:
- € 180/sq.m for exhibition surfaces up to 100 sq.m
- € 170/sq.m for exhibition surfaces from 101 to 300 sq.m
- € 160/sq.m for exhibition surfaces from 301 to 500 sq.m
- € 150/sq.m for exhibition surfaces from 501 to 1000 sq.m
- direct contracting for exhibition surfaces up to 1000 sq.m

The open sides surcharges are as follow: for stands up to 100 sq. m a surplus of 15%, 25% and 40% is applied for, respectively, 2, 3 and 4 open sides. Beyond 100 sq. m a single surplus of 10% is applied.

The registration fee and co-marketing equals € 980,00 whilst the mandatory lumped “canone servizi” (service fee) equals 12 € / sq. m and includes – in addition to the cleaning of the exhibition area, fire extinguishers equipment by law, electrical power up to 10 kW, Wi-fi in the pavilion, municipal tax on advertising and fulfillment of copyright standards from any audiovisual installations on the stand – also the novel digital platform Expoplaza.

The registration fee and co-marketing for any co-exhibitor equals € 1100,00.
Advance payment
After having carefully examined the articles 5, 12 and 13 of the General Rules, the undersigned Company pays as down-payment:
Payment methods accepted
The application form must be fully filled out and sent together with a copy of the bank transfer to:
Headed to: FIERA MILANO SPA
VAT: IT13194800150
reason: Xylexpo 2022 - Registration

BANCA POPOLARE DI SONDRIO - SEDE MILANO
IBAN: IT 69 V 05696 01600 000014087X55 - SWIFT/BIC: POSO IT22
Field required
Catalogue entry
Enter without legal form suffix
Index of products
  • 00 Machines, technical equipment and services for forestry
    • 00.01 Machines, equipment, tools and auxiliary equipment for ...
    • 00.02 Wood harvesting and skidding
    • 00.03 Forestry tools and auxiliary equipment
    • 00.04 Vehicles for timber transport and handling
    • 00.05 Telecommunication facilities and mobile data processing for forestry
    • 00.06 Occupational safety for forestry
    • 00.07 Services for forestry
    • 00.08 Publishers of literature for the forestry industry
    • 00.09 Research and testing institutes, educational institutions (universities, technical colleges, etc.) for the forestry industry
    • 00.10 Environmental protection for the forestry industry
  • 01 Machines and technical equipment for primary processing (production of semi-finished products)
    • 01.01 Roundwood yard
    • 01.02 Sawmilling technology (sawn timber production)
    • 01.03 Drying, steaming and impregnation of solid timber and other materials
    • 01.04 Production of veneers
    • 01.05 Production of solid coating materials based on paper (laminates, films, etc.)
    • 01.06 Production of veneer plywood and laminated veneer lumber
    • 01.07 Production of particle board, fibre board and OSB
    • 01.08 Production of lightweight boards / sandwich elements
    • 01.09 Production of contoured surfaces and mouldings
    • 01.99 Machines and technical equipment for primary processing, other
  • 02 Machines and technical equipment for secondary processing of wood and wood based materials (laminating, machining, gluing)
    • 02.01 Veneer processing
    • 02.02 Presses, laminating and profile wrapping machines for solid coating materials (veneering, laminating, film coating, etc.)
    • 02.03 Sawing machines for further processing of solid wood, wood−based panels, plastics, composites
    • 02.04 Moulding and planing machines
    • 02.05 Finger jointing technology
    • 02.06 Tenoning machines
    • 02.07 Profiling and sizing machines (trimming, length cutting, profiling, sanding, etc.)
    • 02.08 Edge banding machines (edge banding, trimming, sanding, etc.)
    • 02.09 Sizing and edge banding machines (sizing, profiling, edge banding, trimming, sanding, etc.)
    • 02.10 Postforming machines
    • 02.11 Folding systems
    • 02.12 Machines for boring, dowel-driving and hardware inserting
    • 02.13 Hardware recessing machines
    • 02.14 Mortising machines
    • 02.15 Turning machines
    • 02.16 Sanding machines
    • 02.17 Polishing and buffing machines
    • 02.18 Forming machines
    • 02.19 Combined machines (space-induced combinations)
    • 02.20 Machining centres (stationary processing)
    • 02.21 Manufacturing cells
    • 02.22 Presses and equipment for gluing of solid timber components and other materials
    • 02.23 Presses / clamps for corner joints
    • 02.24 Punch presses
  • 03 Machines and technical equipment for surface finishing of wood and wood based materials
    • 03.01 Coating with liquid materials (lacquering, etc.)
    • 03.02 Surface finishing with solid materials
    • 03.03 Machines and equipment for pyrography or marking on wood and wood based products
  • 04 Machines and technical equipment for assembly, packaging
    • 04.01 Assembly technology
    • 04.02 Nailing, stapling and screw-setting machines
    • 04.03 Packaging technology
  • 05 Materials handling, warehousing and commissioning technology of wood and wood based products
    • 05.01 Materials handling technology
    • 05.02 Warehousing and commissioning technology
  • 06 Robots technology applied to wood and wood based products
    • 06.01 Robots for handling, feeding and palleting, etc. of wood and wood based products
    • 06.02 Robots for joining and assembling of wood and wood based parts
    • 06.03 Robots for spraying, lacquering, etc. on wood and wood based materials
    • 06.04 Robots for chipping processes (sanding, cutting, etc.) of wood and wood based materials
  • 10 Machines and plants for special processes of wood and wood based materials
    • 10.01 Laser technology (e.g. for edge-banding)
    • 10.02 High frequency technology
    • 10.03 Microwave technology
    • 10.04 Supersonic technology
    • 10.06 Thermic smoothening
    • 10.99 Special processes on wood and wood based materials; other
  • 11 Machines and plants for special product groups
    • 11.01 Machines and plants for structural elements
    • 11.02 Machines and equipment for manufacturing solid timber boards
    • 11.03 Machines and equipment for manufacturing rack furniture (chairs, tables, etc.)
    • 11.04 Machines for manufacturing and treatment of wooden packaging (pallets, boxes, etc.)
    • 11.05 Machines and equipment for manufacturing doors for furniture
    • 11.06 Machines and equipment for manufacturing drawers
    • 11.07 Machines and equipment for manufacturing picture frames and frames
    • 11.08 Machines and equipment for manufacturing wood barrels
    • 11.09 Machines for manufacturing and processing insulating materials
    • 11.99 Machines and plants for different products
  • 18 Auxiliary machines, equipment and devices; other
    • 18.02 Stirring units
    • 18.03 Weighting systems
    • 18.04 Planing benches, working tables
    • 18.05 Clamps
    • 18.99 Auxiliary machines; other
  • 19 Portable machines for processing of timber, plastics, composites and other materials
    • 19.01 Portable plastic shears
    • 19.02 Portable keyhole saws
    • 19.03 Portable band saws
    • 19.04 Portable circular saws
    • 19.05 Portable debarkers
    • 19.06 Portable planers
    • 19.07 Portable routers
    • 19.08 Portable edge working machines
    • 19.09 Portable boring machines
    • 19.10 Portable chain mortisers
    • 19.11 Portable chisel mortisers
    • 19.12 Portable vibratory sanders
    • 19.13 Portable belt sanders
    • 19.14 Portable disc sanders
    • 19.15 Portable nailers
    • 19.16 Portable staplers
    • 19.17 Portable powered screwdrivers
    • 19.18 Portable glue spreaders
    • 19.19 Portable spraying equipment (e.g. guns for lacquers / adhesives)
    • 19.20 Portable veneer splicing equipment
    • 19.21 Layed floor sanding machines
    • 19.90 Cases for portable machines, tools etc.
    • 19.99 Special-purpose portable machines
  • 20 Tools and auxiliaries for working wood and wood based materials
    • 20.01 Machine cutting tools
    • 20.02 Knives, turn blade knives, hogger segments, etc.
    • 20.03 Tool clamping systems
    • 20.04 Tool measuring and setting systems
    • 20.05 Tool management systems
    • 20.06 Sanding and buffing tools
    • 20.07 Auxiliary equipment and spare parts for machine tools (e.g. clamping wedges, spacers, guide rings, sharpening devices)
    • 20.08 Manual hand-held tools
    • 20.09 Clamps and guides for tools
  • 21 Machines, equipment and tools for maintenance and manufacturing of tools for wood and wood based materials
    • 21.01 Machines, equipment and tools for maintenance and manufacturing of machine cutting tools for wood and wood based materials
    • 21.02 Machines, equipment and tools for maintenance and manufacturing of manual hand-held tools for wood and wood based materials
  • 22 Products for the equipment of machines for wood and wood based materials
    • 22.01 Electrospindles for wood and wood based materials
    • 22.02 Machining units for wood and wood based materials
    • 22.03 Clamps and guides for workpieces of wood and wood based materials
    • 22.99 Items of equipment; other
  • 30 Use of residual wood (dust, chips, firewood, bark), generation of energy and heating using wood fuels
    • 30.01 Preparation, transportation and storage of dust, chips, firewood, etc.
    • 30.02 Generation of energy and heating using wood fuels
  • 31 Energy saving, environmental protection, occupational safety, fire prevention and air-conditioning
    • 31.01 Energy saving
    • 31.02 Safety technology
    • 31.03 Environmental protection
    • 31.04 Occupational safety
    • 31.05 Fire protection and fighting, explosion protection
    • 31.06 Air-conditioning technology
  • 40 Electronic data acquisition and data processing equipment; measuring, testing and control systems for wood industry
    • 40.01 Electronic data acquisition and data processing equipment for wood industry
    • 40.02 Measuring, testing and control systems of wood and wood based products
  • 70 Materials, elements, products and accessories for the wood and furniture industry
    • 70.01 Wooden or wood-based materials, semi-finished products and finished products.
    • 70.02 Chemical products for the wood industry
    • 70.03 Surface treatment and finishing materials
    • 70.04 Auxiliary chemical products for surface treatment and finishing
    • 70.05 Connection and fastening elements
    • 70.06 Functional elements and hardware for wooden articles
    • 70.07 Domestic appliances, built-in elements and kitchen equipment
    • 70.08 Padding material and equipment
  • 80 Delivery of complete plants, financing and leasing companies
    • 80.01 General contractors for the delivery of complete plants
    • 80.02 Financing companies
    • 80.03 Leasing companies
  • 90 Independent computer software (CAD, ERP, production planning and control, etc.)
    • 90.01 Independent software for saw mills and roundwood yards
    • 90.02 Independent software for veneer and plywood production
    • 90.03 Independent software for particle board, fibre board and OSB production
    • 90.04 Independent software for veneer processing
    • 90.05 Independent software for solid wood processing
    • 90.06 Independent software for the furniture industry
    • 90.07 Independent software for window construction
    • 90.08 Independent software for timber construction
    • 90.09 Independent software for the craft business
    • 90.10 Independent software for stair construction
    • 90.11 Independent software for the timber trade
    • 90.50 Standard software for the wood industries (ERP, material management, personnel management, cost accounting, etc.)
    • 90.99 Independent software dedicated to wood industry; other
  • 95 Independent services for the wood industries
    • 95.01 Independent engineering and consulting services for the wood industries
    • 95.02 Training services
    • 95.03 Maintenance, repair, installation, de-installation, refurbishing and retrofitting of machines and plants
    • 95.04 Associations
    • 95.05 Fair organisations
    • 95.99 Services; other
  • 96 Research and testing institutes, educational institutions for the timber and woodworking industries (universities, technical colleges, etc.)
    • 96.01 Educational institutions for the timber and woodworking industries
    • 96.02 Research instititions for the timber and woodworking industries
    • 96.03 Testing institutions for the timber and woodworking industries
  • 97 Publishers of literature for the timber and woodworking industries
    • 97.01 Technical journals and periodicals for the timber and woodworking industries
    • 97.03 Technical books for the timber and woodworking industries
    • 97.04 Web based publications for the timber and woodworking industries
Select at least one category
Co-exhibitors / Represented companies
Number of requested "Co-exhibitors / Represented Companies": It is necessary to fill the data for ALL requested "Co-exhibitors / Represented Companies"